Steps to Resolve Brother Printer Paper Jam Error & Brother Printer Paper Jam Error with No Paper Jammed

Printers use papers to roll out prints. During the process, sometimes bits of paper can get stuck into the interior of a printer. This can prevent it from functioning properly. In technical language, it is referred to as printer paper jam error.

If you own a Brother printer, you can get Brotherprinter paper jam error due to this issue. In fact, printers from other brands can also show up this problem, irrespective of the brand to which it belongs. This problem can keep you from obtaining prints and slow down your productivity drastically.

When a printer develops this issue, an error message notification pops up on the screen. If your printer has broken down due to this issue, here are the things you can do to get rid of the issue. 

Steps to resolve Brother printer paper jam error

●      Turn off the printer and check the paper support flag. See whether it is open or closed. If it is open, close it.

●      Pull the tray out and take out the green levers to find out any piece of paper in the printer. If you find any stuck piece of paper, pull it out carefully or else proceed to the next step.

●      Look for a scrap of paper on the rear side of jam clear flap by opening it. Check for the piece of paper and remove it carefully. Next, put the jam clear flap in its original position. If you did not find any piece of paper, move on to the next step.

●      Open the scanner cover of your printer carefully. Move the printer head carefully to look for any jammed paper in the interior of the printer. Close the scanner and restore the levers back to their original position.

●      Pull the paper support by holding the paper tray until you hear a clicking sound. By doing so you will be able to figure out if you have put the paper tray properly.

●      Connect the power chord and power on the printer. Now try to obtain some prints to verify if the issue has been resolved.

If you observe Brother printer paper jam error with no paper jammed instead of the normal paper jam issue, you need to reset the printer first and then follow the aforementioned step to resolve the issue.

In case either one of both the issues persist, schedule a technician’s appointment so you can have your printer checked for any other underlying cause.

Fix Brother Printer Paper Jam Error

Brother printer paper jam error is one of the common printing issues with Brother printers. It happens when a piece of paper gets stuck into the system. The only way to resolve it is to take out the piece of paper which gets stuck into the interiors of a printer. Here are the troubleshooting steps you need to follow.

Steps to resolve Brother printer paper jam error

• As the first step, make sure you’ve turned off your printer. This is important to make sure that the components in the interior of your printer are still. Otherwise, you may get a burn while working with the printer to fix the issue.

• Find out whether or not the paper support flap is open. Ideally, it should remain closed. In case it is closed, you do not need to take any action. However, you need to close it if it is open.

• Next, take out the printer tray to see if there is any fine paper in it. Tiny bits of printer paper can get into the system to prevent it from communicating properly with the components that play an important role in churning out prints.

• Take a look at both the front side and the rear side of the printer. The notorious bit of paper which is responsible for causing a jam can be present anywhere. If you are able to spot the piece of paper, take it out immediately with care.

• After completing the previous, restore the jam clear flap to its original position. Open the scanner cover carefully and then move the printer head to make sure you remove the paper carefully from it. Thereafter, put the cover of the scanner back and then make sure you also restore both the levers of the printers to the original position.

• Now hold the paper tray with one hand and pull the paper support using the other one. You need to do this until you hear a clicking sound. The clicking sound is the indicator of the fact that you have set it properly.

• Now you’re done. Just try to obtain prints to verify if the issue has been resolved.

If you are able to obtain prints, it is the indicator of the fact that the issue has been resolved. In case you see the issue again, make sure you get in touch with a certified technician so they can examine your printing machine. There can be other underlying causes behind it.

If you come across the Brother printer paper jam error with no paper jammed issue, you need to reset your Brother printer and try out the aforementioned steps thereafter. Make sure you try out these steps before thinking about getting a new printer as it may save you on spending your money in buying a new printer.